FieldPro Logo
HomeAbout_UsProductsInstructionsPricingContact_UsWarranty

Game Feeder I & II

GamefeederI

Part # 624

  1. Feeds once or twice daily.
  2. You set the time that feed is to be scattered.
  3. A special patented rotor prevents the wind from emptying the feeder.
  4. Scatters grain in an 8 to 10 foot circle.
  5. Powered by one 6-volt spring top lantern battery.
  6. Motor run time is adjustable from 1 to 20 seconds.
  7. One year warranty.

The Game Feeder I is a very basic unit designed to scatter feed on the ground once or twice daily. To set the time you want the unit to scatter feed, rotate the switch to the set position at the actual time you want to feed and leave the switch in that position until the unit spins. The unit will feed at that time each day. If you wish to feed twice a day, set the rotary switch to either the 8,9,10,11,14,15,or 16 hour position, and it will feed 8,9,10,11,14,15, or 16 hours after the set time. This number of hours allows you to set the feeder in the morning and use 8, 9, 10, or 11 hours for your afternoon feeding. Or, set the feeder in the afternoon and use 14, 15, or 16 hours later for your morning feed time. Using the one external switch, the spin time of the motor may be adjusted and the unit tested. A 5 second delay is provided in the test mode to allow you to step away from the feeder.

BATTERY IS NOT INCLUDED

PATENT # 5,143,289 GAME FEEDER II – Same as Game Feeder I but uses 1 or 2 6 volt lantern batteries. Adaptable to Solar Panel (SPB)

Game Feeder III

Gamefeeder3
  1. Easy to operate program.
  2. Feeds up to 8 times daily.
  3. Motor run time is adjustable from 1 to 20 seconds.
  4. Powered by one or two 6-volt spring top lantern batteries or optional solar panel.
  5. Scatters grain in an 18 to 20 foot diameter circle.
  6. Microprocessor controlled for accurate feed times and amounts.
  7. A special patented rotor prevents wind from emptying feeder.
  8. One-year warranty.

The Game Feeder III is a programmable unit that offers many features and is easy to operate. To program the timer, rotate the switch to one of the 8 available hours. At that hour hold the push button down continually for 5 seconds until the motor runs twice. This sets the time in the feeder. Select any of the 8 hours as feeding times. The feed times may be set or changed at any time. To adjust the spin time of the motor, rotate the switch to the "spin" position and hold the push button down for the amount of time you want the unit to feed. All this is accomplished without opening the unit.

BATTERIES ARE NOT INCLUDED Patent # 5,143,289

Game Feeder IV

GamefeederIV

Part # 6SF

  1. Easy to set the clock to the hour or half hour at any time between 6 AM and 6 PM.
  2. Feeds up to 7 times each day.
  3. Feed times can be stacked to get different run times at different hours.
  4. Controls are on the outside of the unit. Nothing has to be opened and no tools are required for the unit to be set or tested.
  5. The feeder is powered by one or two 6 volt lantern batteries. There is also an optional solar panel with batteries that may be used.
  6. A special patented* rotor prevents wind from emptying feeder.
  7. One-year warranty.

The Game Feeder IV is designed to be programmed with maximum flexibility and ease. To set the internal clock, use the “am/pm” switch and the rotary switch to select the hour closest to the actual time. Hold the “enter” button down until the rotor spins twice to set the clock to the hour; or let it spin three times to set the clock to the hour plus 30 minutes. Up to 7 different feed times may be entered by simply selecting the desired hour and pushing the “enter” button to let the rotor spin one time. To adjust how much feed the unit throws, rotate the switch to the “spin” position and hold down the “enter” button. However, long you let the rotor spin, that is how long the unit will feed. All programming and testing is easy to do with the feeder above your head, even with gloves on!

BATTERIES NOT INCLUDED *Patent # 5,143,289

Game Feeder V

Part # 6DR

GamefeederV
  1. Four digit readout makes it easy to set clock and feed times.
  2. Feeds up to 8 times each day.
  3. Microprocessor controlled for accurate feed times and amounts.
  4. The amount of feed dispensed is adjustable.
  5. The feeder is powered by one or two 6 volt lantern batteries or optional solar panel.
  6. A special patented* rotor prevents wind from emptying feeder.
  7. Scatters grain in an 18 to 25 foot diameter circle.
  8. One-year warranty.

The Game Feeder 5 is designed to be a durable, long-lasting feeder that may be operated year round. It comes with a 1 year warranty on parts and workmanship. After the warranty period, for a fee, we offer an exchange program that allows you to exchange your unit for a new or remanufactured feeder for years after purchase. The Game Feeder 5 can be programmed to feed up to 8 times a day using the two buttons on the side of the feeder. The "MODE" button allows you to select the hours, minutes, spin time, each of 8 feed times, and the clear position. The "ENTER" button allows you change each of these items. All times are shown in a military or 24 hour format. Since the two buttons are on the side of the feeder, all changes can be made without opening the feeder. To test the unit, just push the "ENTER" button when the display is not active.

BATTERIES NOT INCLUDED *Patent # 5,143,289